Hybrid Lock and Dam Equipment Mechanic na Department of the Army
Department of the Army · Welch, Minnesota, Estados Unidos Da América · Hybrid
- Escritório em Welch, Minnesota
Lock and Dam Equipment Mechanic
Department: Department of the Army
Location(s): Welch, Minnesota
Salary Range: $34.64 - $40.44 Per Hour
Job Summary: About the Position: This position is with the St. Paul District. The position entails inspections, test operations, preventative maintenance, and emergency repair and replacement of a wide variety of electrical, hydraulics, and mechanically interrelated/interlocking facility equipment and controls.
Major Duties:
- Independently schedules day-to-day maintenance and repair work; participates in short- and long-term preventative maintenance; and repair/replacement planning.
- Performs the most complex troubleshooting, diagnostic maintenance inspection, and repair work.
- Provides technical direction to other lower-graded personnel assigned to assist in the accomplishment of repair and maintenance work.
- Makes repairs to electrical/electronic/mechanical/hydraulic/pneumatic equipment as well as a full range of hand tools and power tools relevant to each of these specialty areas.
- Installs new equipment systems or subsystems to replace faulty or worn items.
- Fabricates parts; substitutes or makes component modifications; and takes other action, as necessary, to minimize down-time.
- Maintains records documenting maintenance and repair work to include the preparation of field schematic drawings of equipment and systems as required.
- Inspects, builds, troubleshoots, and/or disassembles electric motors, gasoline and diesel engines of the equipment at the installation, such as electric carts, pumps, generators, compressors, outboard boat motors, lawn and snow removal equipment.
Qualifications: Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Department of Army Civilian Employees Domestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel Workforce Interagency Career Transition Assistance Plan Land Management Workforce Flexibility Act Military Spouses, under Executive Order (E.O.) 13473 Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician Eligible Priority Placement Program, DoD Military Spouse Preference (MSP) Eligible Priority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability Retirement Priority Placement Program, DoD Retained Grade Preference Eligible Veterans Employment Opportunity Act (VEOA) of 1998 Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. There is no specific length of training or experience required. However, you must be able to demonstrate, through experience shown in your written application materials that you possess the sufficient knowledge, skills, and abilities to successfully perform the work of this position without more than normal supervision. Minimum Qualifications (Screen Out Element): Ability to do the work of a(n) Lock and Dam Equipment Mechanic without more than normal supervision. Experience with industrial equipment assembly, maintenance, and repair and the ability to troubleshoot, diagnose, and repair the electrical, electronic, or mechanical aspects of such equipment. Ability to interpret building plans, electrical and mechanical drawings including schematic, blue prints, and interconnect diagrams. Experience with analog and digital control systems with attention to logic-based circuits, interlock circuits, and solid-state PLCs and the ability to use and maintain hand tools and equipment. - Failure to meet this Screen Out Element will result in an ineligible rating. Ability To Do The Work Of The Position Without More Than Normal Supervision (Screen-out Element) Ability to Interpret Instructions, Specification, etc. (includes blueprint reading) Ability To Use and Maintain Tools and Equipment Knowledge of Equipment Assembly, Installation, Repair, etc. Knowledge of Materials Technical Practices (theoretical, precise, artistic) Physical effort: Work requires frequent standing, stooping, stretching, climbing, and crouching. Lifts and carries items weighing up to 50 pounds. Uses coordination of eyes, hands and feet, and also of legs and body in installing, repairing, or testing equipment in confined areas such as manholes. Climbs ladders and poles. Working Conditions: Work is performed inside and outside during the day and at night, as required by emergencies, on high structures over water that is frequently turbulent, in the proximity of moving machinery and high tension electrical wires, and on scaffolds or slings. Occasionally, works behind bulkhead or in tunnels below water level. Is subject to falls, drowning, electrical shocks, injury and discomfort, exposure to moving equipment, machinery, loud noises, inclement weather, and dangerous icy conditions. Uses safety equipment such as life vest, protective hearing devices, hard hat, hard-toe shoes, respirators, and protective clothing.
How to Apply: To apply for this position, you must complete the online questionnaire and submit the documentation specified in the Required Documents section below. The complete application package must be submitted by 11:59 PM (EST) on 08/07/2025 to receive consideration. To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application (https://apply.usastaffing.gov/ViewQuestionnaire/12768078). Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process. After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process. You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application. You must re-select your resume and/or other documents from your USAJOBS account or your application will be incomplete. It is your responsibility to verify that your application package (resume, supporting documents, and responses to the questionnaire) is complete, accurate, and submitted by the closing date. Uploaded documents may take up to one hour to clear the virus scan. Additional information on how to complete the online application process and submit your online application may be found on the USA Staffing Applicant Resource Center. To verify the status of your application, log into your USAJOBS account https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
Application Deadline: 2025-08-07